Bedrijfsintegriteit en Wederzijds Voordeel

Thuis Productenstaalgrating klemmen

bar grating saddle clips

Certificaat
Van goede kwaliteit gegalvaniseerde getande grating voor verkoop
Mijn rooster kwam vandaag en het pasvorm volkomen. Dank u. Laat me weten of zijn er overal dat ik kan positief weggaan terugkoppel over uw bedrijf!

—— Andrew Mullen

Ik ben online Chatten Nu

bargrating zadelklemmen

Grating van de Staalbar Facultatief Vandaal Bestand Type Drie met hoge weerstand van Zadelklemmen

  • Grating van de Staalbar Facultatief Vandaal Bestand Type Drie met hoge weerstand van Zadelklemmen
  • Grating van de Staalbar Facultatief Vandaal Bestand Type Drie met hoge weerstand van Zadelklemmen
Productdetails:

High strength vandal resistant best quality steel grating clamp

Introduction of steel grating clamp

It's a series of metal bars positioned vertically,placed an equal distance apart and joined by cross members to form a rectangular or reticuline pattern.

1. Material

mild carbon steel,stainless steel,aluminum

2. Bearing bar

It's the vertically positioned bars.

 

Size:from 3/4"×1/8" to 7"×1/2"

Bearing bar pitch: from 15/16" to 38/16"

3. Cross bar

Used to secure the position of the bearing bars.

Cross bar pitch: 2" or 4"

4. Optional surface

Plain surface

Serrated surface

Surface Treatment:Untreated, Painting or Hot dip Galvanizing

G - galvanized(Hot dip galvanized, Cold dip galvanized)

P - painted(Painted, Powder coated)

U - untreate

Steel Grating standard:
China: YB/T4001.1-2007(YB/T4001.1-1998)
Britain: BS4592-1:1995
US: ANSI/NAAMM(MBG531-93)
Australia: AS1657-1992

Charaterristics:The installation has the advantages of simple construction, light weight, good impact resistance, good bearing capacity ability,rather large water displacement characteristics, corrosion and rust resistance.

Feature of steel grating clamp

1.Optimum water draining: Water leakage area reaches 83.3%,which is more than two times larger than that of cast iron.

2.Hot-dip galvanizing: Good antirust performance,maintenance free and replacement free.

3.High strength: With strength and toughness far higher than those of cast iron,it can be used in the environment with large span and heavy load,such as the wharf and the airport.

Type of steel grating saddle clip Applicable for bearing bar space
A-30 B-30 C-30 (Bearing bar pitch) 30mm
A-40 B-40 C-40 (Bearing bar pitch) 40mm
A-60 B-60 C-60 (Bearing bar pitch) 60mm
em steel grating clamp
Bearing Bar 3/4"x1/8"to 7"x1/2"
Bearing Bar Pitch 15/16" to 38/16"
Cross Bar Pitch 2" or 4"
Surface plain,serrated
Size (mm) Weight kg/m2 Size(mm) Weight kg/m2
255/30/50 54.1 255/30/100 45.8
325/30/50 64.6 325/30/100 56.2
355/30/50 69.1 355/30/100 60.7
405/30/50 76.6 405/30/100 68.2
455/30/50 84.0 455/30/100 75.7
505/30/50 91.5 505/30/100 83.2
555/30/50 99.0 555/30/100 90.7
605/30/50 106.5 605/30/100 98.3
655/30/50 114.0 655/30/100 105.7
Size(mm) Weight kg/m2 Size(mm) Weight kg/m2
255/40/50 45.8 255/40/100 37.4
325/40/50 53.9 325/40/100 45.6
355/40/50 57.4 355/40/100 49.1
405/40/50 63.2 405/40/100 54.9
455/40/50 69.1 455/40/100 60.7
505/40/50 74.9 505/40/100 66.6
555/40/50 90.7 555/40/100 72.4
605/40/50 86.5 605/40/100 78.2
655/40/50 92.4 655/40/100 84.0

Grating van de roestvrij staalbar Zadel Klemmen Gegalvaniseerd het Staalgrating van J/m-Klemmenbevestigingsmiddel

  • Grating van de roestvrij staalbar Zadel Klemmen Gegalvaniseerd het Staalgrating van J/m-Klemmenbevestigingsmiddel
  • Grating van de roestvrij staalbar Zadel Klemmen Gegalvaniseerd het Staalgrating van J/m-Klemmenbevestigingsmiddel
Productdetails:

Galvanised steel grating clips fastener Stainless Steel Grating Clips

Stai Stainless Steel Grating Clips & Fasteners

  • “J” Clips
    - Hold a single bar and are nearly the same height as the grating
    - These clips can be pulled down completely to the support under the grating
    - Grating Thicknesses 5/8” 1” 1 ½” and 2”
  •  
  • “M” Clips (saddle clips)
    - Hold two bars and can be used to snug the grating to the support.
    - For Molded bar spacing @ 1” 1 ½”narrow 1 ½”wide and 2”
    - Clips for Pultruded Grating thicknesses from 1” 1 ½ “ and 2”
  •  
  • EPC (end panel clips)
    - Used to hold two separate pieces of grating, or two separate panels of grating
    - These should be used where a grating seam crosses a walking path and there is no support immediately under that seam
    - EPC Clips are offered for grating thicknesses of: 1”, 1 ½”, and 2”

 

Application: Attaches grating to structure

Contract Catalog Item:Y

Distance Between Grating Bars:1-1/2"

Expanded Catalog Item:Y

Finish:Galvanized or stainless steel

Grating Bar Depth:2-3/4"

Grating Bar Width:7/8"

Material:Steel

Model Compatibility:Bar Grating, 1-3/16" on Center, 1-1/2" Tall

Style:Mechanical Clamp

Type:Grating G-Clip

Product Weight:9 lbs.

Applications:Attaches Grating to Structure

Notes:Quick Install, Work Done Above Grating, No Damage to Structures

 

Types of fixing clips:

 

* Type A - comprising a top clip with double saddle, a lower clip with teeth and a M10 (or M8)
* Type B - comprising a top clip with double saddle (of which one saddle can secure the two bearing bars of adjacent panels), a lower clip with teeth and a M10 (or M8)
* Type C - comprising a top clip with double saddle and a M10 (or M8)

product code screw dia (mm) grating width (mm) grating depth (mm)
min max max
GRAT 1G08 M08 30 41 50

Technical Data

product code material/finish screw
dia
body
width (mm)
tightening
torque (Nm)
GF3 S08 ASSY 304 stainless steel M08 0.625 8
GF1 G10 ASSY galvanised malleable iron M10 0.750 5

RP de gevormde Grating Bargrating Zadelklemmen/Assemblage van de Roestvrij staalm Klem

  • RP de gevormde Grating Bargrating Zadelklemmen/Assemblage van de Roestvrij staalm Klem
Productdetails:

Klemmen van het het Metaalzadel van roestvrij staalm klemmen de FRP Gevormde Grating Gebruikte

 

De populaire grating toebehoren zijn beschikbaar bij P&R-Metalen. Geen grating baan is volledig zonder de noodzakelijke klemmen, de platen, de bouten en de zetels. Wij dragen gespecialiseerde toebehoren voor onze bargrating.

De Klemmen van „M“ houden twee bars en kunnen aan behaaglijk grating aan de steun worden gebruikt. wegens extra holding worden de mogelijkheden, deze specifiek geadviseerd voor tredeloopvlakken. De tredeloopvlakken zouden een minimum van vier klemmen op elk loopvlak moeten hebben.

 

1. Standaard m-Type, l-Type, C, w-Type, j-Type en g-Type

2. Wij hebben voorraad voor standaard van klem
3. Materiaal: Gegalvaniseerd, SS201 SS 304, SS316L
4. Productie onder de kwaliteitscontrole van ISO 9001

5. De vrije steekproeven kunnen worden verstrekt.

6. Betaling: T/T, Western Union

7. Het pakket van de kartondoos

8. 7 dagenlevering

 

Wanneer het boren van de steun moet het lid worden vermeden, de j-Type klemaanbiedingen de oplossing. De j-Klem zou door het raspen van vierkant gat met een vierkante noot kunnen zijn, konden wij torque de bout vanaf grating bovenkant. Een zwaardere hoogste klem voltooit dan de assemblage om de ladingen te dragen. De klem verstrekt uitstekend tweerichtingsholdingsvermogen voor gevormde grating van de vierkante openingglasvezel

Bevestigingsmiddelen/Klemassemblage voor Glasvezelproducten:

De klemmen kunnen worden gebruikt om grating of plaat te beveiligen aan de ondersteunende structuur of aangrenzende gratings panelen vast te maken om lading veroorzaakte differentiële afbuiging te minimaliseren. Het maximum geadviseerde klem uit elkaar plaatsen is 48 duim op centrum met een minimum van vier (4) klemmen per stuk van grating.

 

Toepassing

 

Chemische & Petrochemische Installaties

Voedsel & Drankinstallaties

Olie & Gas, Zeeinstallatie & Elektrische centrales

Waterzuiveringsinstallaties & Waterpools

Helling, Steiger, Spoorwegvoetpad

Werkende Platforms & Geuldekking

Gangen, Voetgangersbruggen & Trap

Architectuur & Bouwnijverheid

Dik (MM.)
Maaswijdte (MM.)
Comité grootte (MM.)
Open gebied (%)
Gewicht (kg/m2)
25


38*38

1220*2440
2440*3660
65
12.5
30
68
15.5
38
68
19.5
30

(bovenkant) 19*19/(bodem) 38*38
1220*2440
2440*3660
30
20
38
30
24

 

Punt

Dikte

mm

Maaswijdte

mmxmm

Comité Grootte

mmxmm

Gewicht

kg/Square meter

01 15 38x38 1223x3660 7
02 15 50x50 1223x3660 6.5
03 25 25x100 1010x3010 12.4
04 25 19x19 1223x3660 12.5
05 30 19x19 1223x3660 21.5
06 30 38x38 1223x4040 15.1
07 38 19x19 1223x3660 22.8
08 38 38x38 1000x4040 19.5
09 38 38x38 1223x3660 19.5
10 40 40x40 1250x3690 19.3
11 50 50x50 1223x3660 21.5

 

Grating van de laag Koolstofstaalbar het Zadel knipt Type A Type C 3mm/4mm Dikte

  • Grating van de laag Koolstofstaalbar het Zadel knipt Type A Type C 3mm/4mm Dikte
Productdetails:

Steel grating clamps fastener used in construction type A type c

 

Steel grating clamp for platform

  • Material of steel grating clamp: Low Carbon Steel then galvanized
  • Fabricating Method: The press welded steel grating, requested by the customers, is made of load flat steel

bar and cross rods, placed, horizontally and vertically, and at an equal pitch apart, by welding with 200-ton

hydraulic resistance automatic welding equipment, then cutting, punching and banding ends.

  • Load Bearing Steel Bar Pitch: Pitch between the two neighboring load bearing steel bars is 30mm or 40mm.
  • Cross Rod Pitch: Pitch between two neighboring cross rods is usually 50mm or 100mm.

steel grating clamp specifications

  • Bearing Bar (Load Bar) Specifications (mm):

The specification of plain type and serrated type bearing bar is 20 x 3 to 100 x 10;

the specification of I-section type is 25 x 5 x 3, 32 x 5 x 3, 38 x 5 x 3, 40 x 5 x 3, 50 x 5 x 3, 50 x 7 x 4,

55 x 7 x 4, 60 x 7 x 4, 65 x 7 x 4, 70 x 7 x 4, 75 x 7 x 4, etc.

  • Bearing Bar Pitch (center to center):

America standard is available

1'' x 3/16'', 1 1/4'' x 3/16'', 1-1/2'' x 3/16'', 1'' x 1/4'', 1-1/4'' x 1/4'', 1 1/2'' x 1/4''(19-w-4),(19-w-2) and so on.

  • Cross Bar Pitch (center to center):

38, 50, 76, 100, 101.6mm etc.
50, 100mm are recommended

  • Surface Treatment:

Untreated, Painting or Hot dip Galvanizing

steel grating clamp application:
steel grating clamp are widely used by various plants such as

  • electric power
  • petroleum
  • chemical industry
  • metallurgy industry
  • machinery industry
  • shipbuilding
  • oceanographic engineering
  • building materials
  • paper mills
  • cement plant
  • medicine
  • spinning and weaving
  • foodstuff factory
  • transportation
  • municipal administration
Trade Terms
  • Trade terms: FOB, CFR, CIF, L/C
  • Payment term: 30% T/T in advance 70% against B/L copy
  • MOQ: 100pc
  • Port: Tianjin
  • Sample time: 5-7 days
  • Lead time: 10-30 days (Depend on quantity)
  • Shipment: By sea
steel grating standrd
  steel grating standard steel standard galvanizing standard
China YB/T 4001.1-2007 GB 700-88 GB/T 13912-2002
USA ANSI/NAAMM (MBG531) ASTM (A36) ASTM (A123)
U.K. BS 4592 BS4360 (43A) BS 729
AUS AS 1657 AS 3679 AS 1650
ries Series distance Traverse line distance Load flat specifications (wide×thick)
20×3 25×3 32×3 40×3 20×5 25×5
1 30 100 G203/30/100 G253/30/100 G323/30/100 G403/30/100 G205/30/100 G255/30/100
50 G203/30/50 G253/30/50 G323/30/50 G403/30/50 G205/30/50 G255/30/50
2 40 100 G203/40/100 G253/40/100 G323/40/100 G403/40/100 G205/40/100 G255/40/100
50 G203/40/50 G253/40/50 G323/40/50 G403/40/50 G205/40/50 G255/40/50
3 60 50 - G253/60/50 G253/60/50 G403/60/50 G205/60/50 G255/60/50

 

series Series distance Traverse line distance Load flatspecifications (wide×thick)
32×5 40×5 45×5 50×5 55×5 60×5
1 30 100 G325/30/100 G405/30/100 G455/30/100 G505/30/100 G555/30/100 G605/30/100
50 G325/30/50 G405/30/50 G455/30/50 G505/30/50 G555/30/50 G605/30/50
2 40 100 G325/40/100 G405/40/100 G455/40/100 G505/40/100 G555/40/100 G605/40/100
50 G325/40/50 G405/40/50 G455/40/50 G505/40/50 G555/40/50 G605/40/50
3 60 50 G325/60/50 G405/60/50 G455/60/50 G505/60/50 G555/60/50 G605/60/50

 

Het gelaste Grating van de Type316l Bar Zadel knipt 100mm/50mm M Spanwijdtesgs Goedkeuring

  • Het gelaste Grating van de Type316l Bar Zadel knipt 100mm/50mm M Spanwijdtesgs Goedkeuring
Productdetails:

Q235 304 316L welded type 325 steel grating clamp grating clips

 

 

Material of steel clips: Q235 stainless steel 304
  • Machining processes: Metal fabrication, machining, welding, forming, shaping, punching, drilling, milling, grinding, rolling, stamping, deep drawing, bending, welding, etc
  • Size:

    The specification of plain type and serrated type bearing bar is 20 x 3 to 100 x 10;the specification of I-section type is 25 x 5 x 3, 32 x 5 x 3, 38 x 5 x 3, 40 x 5 x 3, 50 x 5 x 3, 50 x 7 x 4, 55 x 7 x 4, 60 x 7 x 4, 65 x 7 x 4, 70 x 7 x 4, 75 x 7 x 4, etc.

    2) Bearing Bar Pitch (center to center):

    12.5, 15,25, 30, 30.16, 32.5, 34, 40, 41.25, 45, 50, 60, 60.32, 80, 100 mm etc, also be according to client's requirement and 30, 40, 60mm are recommended,

    America standard is available <1' x 3/16', 1 1/4' x 3/16', 1-1/2' x 3/16', 1' x 1/4', 1-1/4' x 1/4', 1 1/2' x 1/4'(19-w-4),(19-w-2) and so on.>

    3) Cross Bar Pitch (center to center):

    38, 50, 76, 100, 101.6mm etc, also be according to client's requirement and 50, 100mm are recommended, America standard is available.

  • Surface treatment:galvanizing, powder coating
  • Application:Industry, Electrical industry, Mining industry, mechanical, metals, components for furniture, auto, machines etc.

steel grating clamp Advantage

1, factory direct offer

2, OEM, all with your design

3, tolerance:+/-0.01mm

4, feature:Firm, durable, artistic, devisable and reasonable price

 

Payment Terms

1, T/T 30% deposit, the balance paid against the copy of B/L

2, L/C 100% irrevocable L/C at sight

3, West-Union (small order)

4,PayPal (small order)

 

Contactgegevens
ANPING BAOSHENG WIRE MESH PRODUCTS CO.,LTD

Contactpersoon: Mr.

Tel.: 86-311-67902761-8:00

Fax: 86-311-67902762

Direct Stuur uw aanvraag naar ons (0 / 3000)